Table of Contents
Advertisement
Verifying the IP Address in Windows XP
To check the IP address:
1. On the Windows Desktop, click Start.
2. Select Run. The Run window is displayed.
3. Type cmd and click OK.
4. Type ipconfig and press ENTER to display your IP configuration.
If an Autoconfiguration IP address is displayed, that indicates possible broadband
network problems or an improper connection between your computer and the SBG941.
The Autoconfiguration IP address, ranging from 169.254.0.0 to 169.254.255.255, is
reserved for Automatic Private IP Addressing (APIPA).
This can occur if the modem is configured to automatically obtain an IP address from a
Dynamic Host Configuration Protocol (DHCP) server. When Auto-configuration is
enabled, Windows will automatically assign an IP address if the cable modem gateway is
unable to obtain one. Because this automatically assigned IP address is not valid, you will
not be able to access the Internet using the cable modem gateway.
Check the following:
•
Your cable connections
•
Whether you can see cable-TV channels on your television
After successfully verifying your cable connections and proper cable-TV operation, you
can
renew your IP
Verifying the IP Address in Windows Vista
Do the following to verify the IP address:
1. On the Windows Desktop, click Start.
2. Click All Programs.
3. Click Accessories.
4. Click Run to display the Run window.
5. Type cmd and click OK to open a command prompt window.
6. Type ipconfig and press ENTER to display the IP Configuration.
If an Auto-configuration IP address is displayed, that indicates possible broadband
network problems or an improper connection between your computer and the SBG941.
The Auto-configuration IP address, ranging from 169.254.0.0 to 169.254.255.255, is
reserved for Automatic Private IP Addressing (APIPA).
Installing the Modem • Connecting to the Internet
Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide
570280-001-a
address.
B
10
Advertisement
Table of Contents
