Intel SSDPAMM0004G1 Product Manual page 13

Intel® Z-P230 PATA SSD
Figure 6. Intel Z-P230 PATA SSD with Mini PCIe Connector (Top, Side and Bottom
Views)
Ø 2.6 0.1 (X2)
±
NAND
Notes:
1. All dimensions are in millimeters.
2. Card thickness to be 1.0 ± 0.1 mm, including solder plating unless otherwise specified.
3. Solder plating thickness to be 0.05 mm MAX TYP.
4. Coordinates indicate the center of this connector, or the center of the positioning pin/hole, or the location of #pin.
September 2008
Order Number: 319955-003US
NAND CONTROLLER
3.2
5.1 MIN
48.05 0.1
±
0
50.95
-0.3
3.25
5.1 MIN
COMPONENT KEEP OUT
AREA FOR CONNECTOR
COMPONENT KEEP OUT
AREA FOR CONNECTOR
Intel® Z-P230 PATA Solid State Drive
Product Manual
13