Motorola NETOPIA 2247/57-62 User Manual page 4

Connections
2
1. Decide on a location for the Gateway.
Put the Gateway near a power source, a DSL wall outlet, and in a location where air can circulate
freely around it.
2. Power the Gateway.
Connect the power supply to the power jack on the back panel of the Gateway. Then, plug the
power supply into an electrical outlet. Turn on the Power switch.
The Power LED should light solid green.
3. Insert the Motorola Netopia
The Motorola Netopia
running easily. These tasks include making the cable connections, adding phones and configuring
the Gateway. Run the Wizard on every Windows-based PC that will connect to your network.
4
®
CD into your CDROM drive.
®
Installation Guide Wizard automates several tasks to get you up and
The Installation Guide Wizard will start auto-
matically and the Welcome screen will appear
to step through the process.
Follow the on-screen instructions to make all
of your connections.