Basic Troubleshooting
This section gives some simple suggestions for troubleshooting problems with your Gateway's initial
configuration.
Before troubleshooting, make sure you have
•
plugged in all the necessary cables (see
•
set your PC's TCP/IP controls to obtain an IP address automatically (see
The first step in troubleshooting is to check the status indicator lights (LEDs) in the order outlined
below.
Front View
Power
Ethernet 1, 2, 3, 4
WPS
16
"Connections" on page
4); and
"Client Configuration" on page
Internet
DSL
Wireless
11).