Table of Contents
Advertisement
camera operation
White bal (White balance)
Use the White Balance function to adjust the screen color.
When the SETUP menu screen is
1.
displayed, select 'White Bal' by
using the Up and Down buttons so
that the arrow indicates 'White Bal' .
2.
Select a desired mode using the Left
and Right buttons.
Select one of the following 6 modes, as appropriate for your purpose.
※
aTW : Select this when the color temperature is between 1,800˚K and 10,500˚K.
ouTDoor : Use it in a color temperature range of 1,800K to 10,500K.(including
inDoor : Select this when the color temperature is between 4,500˚K and 8,500˚K.
manual : Select this to fine-tune White
aWC→sET : To find the optimal luminance level for the current environment, point the
mercury : This is an auto compensation function that optimizes camera colors
White Balance may not work properly under the following conditions. In this case select the
M
AWC mode.
Select this When the color temperature of environment surrounding the subject is out of
1
the control range (e.g. clear sky, or sunset)
When the ambient illumination of the subject is dim.
2
If the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
22_ camera operation
Natrium). Auto adjustment is made to optimize the camera color to
the outdoor environment.
Automatically adjusts the camera color for optimization to the indoor
environment.
Balance manually. Set White
Balance first by using the
ATW or AWC mode. After
that button to MANUAL
mode, fine-tune the White
Balance and the SET button.
camera towards a sheet of white paper and press the SET button. If the
environment changes, readjust it.
for the environments such as mercury lamps.
MAIN SETUP
1. PROFILE
2. SSDR
▶ 3. WHITE BAL
WB MANUAL
▶ 1. RED GAIN
2. BLUE GAIN
3. RETURN
BASIC
ON
ATW
--
------ 485
--
------ 535
Advertisement
Table of Contents
