Using Fiber Optic Strobes; Using The Camera's Built-In Flash; Recommended Accessories And Attachments - Ikelite m10 Manual

Using Fiber Optic Strobes

1. Attach Fiber Optic Cord(s) to the housing Fiber Optic Port(s) next to the
housing port, Diagram E, page 14.
2. Extend camera flash.

Using the Camera's Built-in Flash

The built-in camera flash can only be used to trigger fiber optic strobes.
The flash alone will NOT illuminate subjects underwater.

RECOMMENDED ACCESSORIES and ATTACHMENTS

Optional Tray + Release Handle 9523.63
The optional aluminum tray with release handle
comes with the necessary hardware to mount to
your Ikelite housing.
Optional Tray + Dual Handles 9523.64
Attaching an optional Tray + Dual Handles
will add stability and gripping point(s) for
comfortable use of the housing. Add a
second strobe to eliminate shadows and
evenly light your subjects.
Go to ikelite.com for a complete list of accessories for your housing.
MADE IN USA
MADE IN USA
15