mount and connect the MOTONAV
device
Caution: The location of the MOTONAV device must
not interfere with the vehicle's air bag deployment.
Caution: DO NOT MOUNT IN A LOCATION THAT
OBSTRUCTS DRIVER'S VISION OR INTERFERES
WITH OPERATION OF THE VEHICLE.
1
Clean mounting surface thoroughly with an
alcohol wipe (supplied).
2
If using adhesive to attach mounting arm to the
dashboard, peel tape off of the adhesive pad
(supplied) and apply to bottom of the mounting
arm.
Note: If using screws to attach the mounting arm
to the dashboard, do not use the adhesive pad.
10
mount and connect the MOTONAV device
3
Attach cradle to mounting arm.
Note: Be sure to utilize the cradle that comes
with the car kit. (The cradle included with the
MOTONAV device may not have the same
functionality.)