Install The Car Kit; Before You Begin - Motorola MOTONAV TN500 Series Installation Manual

install the car kit

before you begin

Caution: Only qualified personnel should install this
car kit. Because of the wide variety of vehicle types
and models, it may be necessary to contact the
vehicle manufacturer for detailed installation
information. If needed, contact the vehicle
manufacturer for air bag information specific to the
vehicle.
Caution: An air bag inflates with great force. Do not
place objects, including communication equipment, in
the area over the air bag or in the air bag deployment
area. If the communication equipment is improperly
installed and the air bag inflates, serious injury could
occur.
Please follow these guidelines:
4 install the car kit
• Mount components securely on strong
surfaces to prevent shifting that could cause
injury or interfere with safe vehicle operation.
Use the supplied mounting hardware as
needed.
• Mounted components and attached wires or
cables must not interfere with seating or leg
space.
• Route cables so they are protected from
pinching, sharp edges and crushing. Keep all
in-line connectors easily accessible.
• The harness is intended for use in 12 Volt
negative ground systems only. The harness
draws less than 10 Amps. Confirm that the
vehicle's electrical system can supply this
current.