connect the ISO cable
The ISO cable connects the vehicle integration kit to
the vehicle wiring. It connects the vehicle's power,
ignition, and entertainment system to the car kit.
Disconnect battery from vehicle.
Caution: Removing battery power may set
trouble codes that can only be reset by a factory
diagnostic tool on some vehicles. Please check
install the car kit
with your vehicle manufacturer if you are unsure
how your vehicle may react.
Disconnect appropriate connections on the
vehicle audio system to allow installation of the
ISO cable (and adapters, if needed).
Connect cable connectors H and I to the vehicle
Connect cable connector G to the vehicle wiring
harness ISO connectors.
Connect cable connector F to vehicle integration
kit connector A (shown on page 5).
Note: Make sure cable connector is plugged all
the way into the vehicle integration kit.