DSC Power632 Installation Manual page 46

[804] PC5132 Wireless Expansion Programming
Please refer to your PC5102/PC5132 Installation Manual for programming locations and instructions.
NOTE: The LINKS2X50 module has not been investigated by
UL.
Special Installer Functions
[901] Installer Walk Test Mode Enable / Disable
[902] Module Supervision Reset
[903] Module Supervision Field
[904] Wireless Module Placement Test
For more information, please refer to your PC5102/PC5132 Installation Manual
• Select the module / transmitter (zones 01-32).
Placement Led Keypad
Good Light 1 ON Steady
Bad Light 3 ON Steady
[990] Installer Lockout Enable
[991] Installer Lockout Disable
[993] Restore Alternative Communicator to Factory Default Programming
(Section 5.28 "Resetting Factory Defaults*" )
[995] Restore Escort5580 to Factory Default Programming
[996] Restore PC5132 to Factory Default Programming
[997] Restore PC5400 to Factory Default Programming
[998] Restore PC59XX to Factory Default Programming
[999] Restore PC1555MX to Factory Default Programming
42
(Section 5.30 "Walk Test (Installer)" )
(Section 2.8 "Removing Modules" )
(Section 2.7 "Supervision" )
LCD Keypad
"GOOD"
"BAD"
(Section 5.29 "Installer's Lockout" )
(Section 5.29 "Installer's Lockout" )
• Press [#] to Cancel.
Bell / Buzzer
1 Beep / Squawk
3 Beeps / Squawks
(Section 5.28 "Resetting Factory Defaults*" )
(Section 5.28 "Resetting Factory Defaults*" )
(Section 5.28 "Resetting Factory Defaults*" )
(Section 5.28 "Resetting Factory Defaults*" )
(Section 5.28 "Resetting Factory Defaults*" )