Registration (Pairing); View Video Through Tv - Motorola SCOUT1000 User Manual

2. During power ON, when adapter is plugged in, the battery icon on
screen's top right corner will show that the battery is charging. The
Blue LED at the top left corner light up indicates adapter is plugged in.
2.4

Registration (Pairing)

The digital video pet monitor is pre-registered to your Owner Unit. You do not
need to register it again unless the Pet Unit loses its link with the Owner Unit.
To re-register your Pet Unit, or register a new Pet Unit, follow the
procedure below:
M
1. Press the
2. Press the
<
and the /
+
3. Press the
the OK button to confirm.
4. 1 / 2 /
DOWN button to select the desired CAM and press the OK button to
start searching for a pet unit. The green audio level LED will flash
rapidly while searching.
5. Press the OK button to confirm.
6. Press and hold the PAIR button underneath the pet unit until the owner
unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Pet Unit was registered previously, registering this current
Pet Unit again will overwrite the previous registration.
2.5

View Video Through TV

Connect a suitable AV cable into the AV OUT socket on the side of the
Owner Unit and into the AV input of the TV. Scroll through the AV inputs
on the TV menu until the digital video pet monitor picture is shown.
AV cable is an optional accessory, available for purchase separately.
NOTE
The Monitor's power button must be turned ON and CAM pre-selected
before connecting the AV cable. Once the AV cable is connected, the
Monitor's controls cannot be activated.
10
button of the owner unit and the menu bar will pop up.
LEFT button or
>
/ / menu will pop up.
-
UP button or
3 / 4 will pop up, press the
RIGHT button until
DOWN button to select
is highlighted,
, and press
+
UP button or
Getting Started
-