Activating The Infrared Data Port - Motorola 9505 User Manual

Getting to Phone Setup...
M
1.
Press
M
2.
Press

Activating the Infrared Data Port

156 Customizing Phone Features
Phone Setup
until you see
to scroll to one of the features described below.
Use this feature to activate the infrared data port on
your phone when you want to establish a wireless
infrared connection with an external device.
1. Follow the steps in "Getting to Phone
Setup..." to get to
press
Cancel?
2. Align your phone so that the infrared data
port on the phone is in direct line of sight with
the infrared data port on the external device.
Make sure that both infrared data ports are
within their effective range. You will see
Activated
3. Press and hold
Your phone waits for an infrared connection for up
to five minutes. If an infrared connection cannot be
established, and your phone is running on battery
power, the phone then deactivates the infrared
data port. Before deactivating, your phone emits an
alert tone and displays
seconds. Press
reactivate the infrared data port.
If you move your phone out of effective range for
more than one minute when an infrared connection
has been established, you will see
For instructions on usingTrueSync to exchange
contact information with your computer, please
refer to the TrueSync User's Guide.
Note: This feature will be available in the first
quarter of 2000.
, and then press
Activate IR Port
O
to select. You will see
.
when the connection is established.
C
to exit the menu.
Reactivate IR Port
O
when you see this message to
O
.
, and then
Activating
for ten
Connection Lost
.