Matrix H7X-03 Service Manual page 43

CHAPTER 9: PART REPLACEMENT GUIDE
9.5 CONSOLE KEYPAD / OVERLAY REPLACEMENT - CONTINUED
7) Press down on the corners of the overlay / keypad to keep it in place. Then remove the protective film (Figures G & H).
FIGURE G FIGURE H
8) Once the overlay / keypad is in the correct position, press down on it to adhere it in positions (Figure I).
FIGURE I
9) Use the same procedure to replace any additional faulty overlays / keypads. NOTE: Overlays / keypads cannot be re-used.
10) Test the bike for function as outlined in Section 9.22.
40