Snom M700 Deployment Manual page 16

DECT Property
It is recommended to have a RSSI value better than/equal to ‐75dBm, and never below ‐90dBm.
Next step involves adding extensions to the system. Follow all steps from the "snom M300 and M700
administration and installation guide".
Version 1.0
In the drop down menu you can see the signal strength indication to all
other possible base stations.
Base station characteristics in connection to the current multi cell
network. Possible Output(s)
‐Primary: Master base station unto which all other nodes in the chain
synchronises to.
‐Locked: The Base unit is currently synchronized and locked to the master
Base unit.
‐Searching: Base unit in the process of locating to a Master/slave as
specified in DECT sync source .
‐Free Running: A locked Base unit that suddenly lost synchronisation to
the Master.
‐Unknown: No current connection information from specific Base unit.
Page | 16