Dect Chain - Snom M700 Deployment Manual

DECT Chain

After a Multi cell installation you can manually configure the synchronisation source tree. On the
settings page, scroll to the "Multi cell" settings and Enable or Disable the "Auto configure DECT sync
option source tree".
ID
RPN
MAD Address
Version
Status
DECT Sync
Version 1.0
Base unit identity in the chained network.
The Radio Fixed Part Number is an 8‐bit DECT cell identity allocated by
the installer. The allocated RPN within the installation must be
geographically unique. Base stations' and repeater's RPN must only differ
on least significant bits that are masked out by the handover mask.
Contains the hardware Ethernet MAC address. Please refer to the
product labels.
Base station current firmware version.
Current Base station behaviour in the SME network.
Possible Outputs:
‐Connected: The relevant Base station(s) is online in the network
‐Connection Loss: Base station unexpectedly lost connection to network
‐This Unit: Current Base station whose http Web Interface is currently
being accessed
The administrator can choose the relevant "multi cell chain" level.
Maximum number of "multi‐cell chain" levels is 6.
Page | 15