Installation - Snom M700 Deployment Manual


BS#24 or BS#26 cannot reach BS#20 (master) directly, but only through BS#25

BS#21 or BS#23 cannot reach BS#20 (master) directly, but only through BS#22

Installation

Start with the intended master base station. It is recommended to update and reset all base stations
prior to installing them in a multicell setup. Secondary base stations must be reset to defaults!
Important: Secondary base stations must not contain any (SIP) "Server" inputs. Disable the option
"Plug&Play" in the menu "Network" to prevent an automated setup of a (SIP) server if you have
related DCHP options running in your network.

Only for the master base station:
Follow all steps from the "snom M300 and M700 administration and installation guide":
o Set up a SIP server
o Create a user account
o Register handsets

Use the web browser menu and navigate to "Time" settings (left column). Enter the relevant
parameters on this page and press the Save button. Make sure that the "Time server" is
working, otherwise the Multi‐cell feature will not work.
Base stations must be rebooted after the time server has been set.
Version 1.0 Page | 13