WAGNER Power Painter Max Owner's Manual page 13

8
8. Clean all parts thoroughly with
the brush provided using a
solution appropriate to the type of
material you sprayed.
LATEx MATERIALS ONLY
11
11. Thread the cleaner nozzle onto
a garden hose.
9
9. ImpoRTANT: make sure to completely
remove all material from the inside of the
piston chamber by scrubbing with the
brush. Even a small amount of material
can dry like glue and keep the piston from
moving, causing damage to the sprayer.
12
12. Insert nozzle into the end of
the suction tube and place into
a waste container.
Turn on the water and flush
the suction tube until clean.
10
(a)
10. ImpoRTANT: make sure to keep the vent
hole (a) on the pump housing clean and
unblocked or a vacuum can build up in
the container and cause damage to the
sprayer. A toothpick or straightened paper
clip can be used to clean it.
OIL-BASED MATERIALS ONLY
13
13. Using the cleaning brush and
mineral spirits, clean out the
inside of the suction tube.
13
14
(a)
(b)
14. Lubricate the O-rings as
shown with the included
lubricant.
Reassemble the filter
assembly.
English