Cleanup - WAGNER Power Painter Max Owner's Manual

Cleanup

(cup mode)
You will need:
Start
• Waste container
• Cleaner nozzle and lubricant
• Warm soapy water if you sprayed latex
materials
• Mineral spirits if you sprayed oil-based
materials
make sure you clean the sprayer in a
well-ventilated area whenever
cleaning with flammable solvents.
The sprayer contains electrical parts.
Do NoT submerge the sprayer into
any liquids.
4
4. Turn the tip nut counter-
clockwise and remove the
adjustable spray tip assembly.
Pull the atomizer valve out,
being careful not to lose it.
English
1
1. Unplug the sprayer. Pour the
remaining material back into
the original container.
Rinse the inside of the cup
with the appropriate cleaning
solution.
5
5. Turn the locking nut
counterclockwise until it is
removed.
12
2
2. Remove the suction tube and
filter assembly.
6
6. Slide the pump housing off the
sprayer.
3
(a)
3. Disassemble the suction tube
and filter assembly.
Note: The threads on the bottom
housing (a) are left-handed. You
will need to turn the bottom housing
to the right in order to remove it.
7
7. Remove the spring and piston
from the pump assembly.