Hangar 9 Alpha Trainer Assembly Manual page 14

Section 5: Installing the Landing Gear
Step 5
Locate the nose wheel steering block. Mount the steering block to
the firewall of the fuselage as shown.
Step 6
Slide the nose gear wire through the steering block and steering
arm as shown and tighten the setscrew on the steering arm to
secure the nose gear. You want the setscrew to tighten against the
flat ground into the nose gear wire.
14
and Wheels
Step 7
1
Install the 2 / " nose wheel using two wheel collars as you did for
2
the main wheels in Step 6 centering the wheel on the axle.
Continued