Appendix 2 - Walking Belt Adjustment - Bowflex TC5300 Service Manual

aPPendix 2 - Walking belT adjusTmenT

Walking belt adjustment
If either of the walking belts seem to be tracking excessively to one side or the other, adjustments can be made at the
front roller of each treadle.
misalignment Test and resolution
Visual Test – Standing beside the unit, set the speed at 2 MPH (3.2 KPH). Standing in front of the unit you will see
adjustment bolts on each end of each front roller. If the belt is tracking too far to the right, tighten the right adjustment
bolt on that roller using the provided hex key in full turn increments to realign belt. If the belt seems to be tracking too far
to the left, do the same thing on the left adjustment bolt for that roller.
Belt Adjustment Bolts
Walking Belt Correctly
Aligned
NOTE: Belts s hould not be so tight that you cannot get your hand under them when machine is turned off and
unplugged.