Demo Function; Child Lock; Unlock; Cooling Fan System - Technika T45COG Instructions For Use And Installation

intervals of 30 seconds in 5 minutes.DPS1 shows "End" and flashing. The oven will go into
standby mode after 5 minutes. And you can also press PT2 let the oven into standby mode.

7.6 Demo function

Oven in OFF (closed) mode, don't show the clock, show only clock mark "
PT1 until DSP1, appear ON the DSP2 OFF SHO, namely demo function inactive, rotate PT1
activation demo function ON SHO, the press PT2 determine activation demo function
Demo function (banned all heating components work, only furnace lamp, cooling fan work),
normal use steam furnace, to set up OFF SHO
Activate demo function (ON SHO), steam furnace in any function of cooking is started, the
screen will display ON SHO and the current setting function display flashing display, every 5
seconds a flashing
Note: Demo function has the memory function, the power in the circumstances, to power
on safety lock function or continues to work.

7.7 Child lock

Oven in OFF (closed) mode, don't show the clock, show only clock mark "
hold PT1 until DSP1, appear on the DSP2 OFF SHO, then click the PT1 until DSP1, appear on
the DSP2 OFF bLOC.
Turns PT1 can choose safety lock activation function ON bLOC and closing OFF bLOC,
when DSP1, DSP2 display ON bLOC, press the PT2 confirm activation child lock, DSP4 display
icon " ".
After lock, regardless of PT1 or PT2 key, on the screen will show "bLOC" 3 seconds, and
then return to the interface of the before.

7.8 unlock

Temporary release: hold PT1 DSP4 until the symbol "
undertake any function operation and parameter modification, 2 minutes later, and into the safety
lock mode. Temporary release 2 minutes no matter in standby state or working status, 2 minutes
right after automatic into safety lock mode
Permanent unlock: into the safety lock mode, in accordance with this chapter introduces the
operation method, carries on the permanent unlock

7.9 Cooling fan system

The attached cooling system of a small oven, but start small oven function, the system is
fixed on the top plate temperature of 65 degrees after operation. Fan run of airflow along the top
of the door out, even shut down the small oven, the system will continue to work for a moment.
Note: when the top plate temperature below 65 ℃ tubular fan to stop working.

7.10 lamps

The furnace lamp always light when the oven is operation except pause.

7.11 Other

With selecting or pause status, if there is no operation in continuous 3 minutes, the oven will
go to standby status automatically.
 Shut off status: indicators including functions, DSP1, DSP2, will go out, clock symbol only
light.
 Standby status: functions symbol go out, lock indicator only light, DSP1 show the current
time
 Waiting to choose functions status: functions symbol go out, lock indicator only light, DSP1
" disappear, at this time can
" state, hold
" state,