Lower Cabinet Face Plate; Hinge Mount Support Bracket; Rear Panel; Cabinet/Shell - Sub-Zero 315I Technical Service And Parts Manual

Component Access/Removal
Lower Cabinet Face Plate Removal
The lower cabinet face plate is attached to the cabinet
with screws: two screws pass through the bottom hinge
and the face plate, and two screws pass through the
face plate on the handle side. All four screws then
attach to the bottom hinge mount support bracket
To remove the lower cabinet face plate, the door must
be removed first. Then, extract the two screws on the
handle side and pull the face plate forward. (See
Figure 5-10)
Hinge Mount Support Bracket Removal
The upper and lower hinge mount support brackets are
secured to the cabinet/shell with screws.
To remove the hinge mount support brackets, the door,
bin trim ring, upper cabinet face plate, bin seal and
lower cabinet face plate must be removed first. Then,
extract the bracket mounting screws. (See Figure 5-11)
Rear Panel Removal
The rear panel is held to the back of the unit with
screws. To remove the rear panel, extract the panel
mounting screws and pull the panel from the unit. (See
Figure 5-11)
Cabinet/Shell Removal
The cabinet/shell is secured to the rest of the unit with
screws along the bottom of both sides of the unit,
screws at the top and bottom of the bin opening and
mounting screws for some of the exterior components.
To remove the cabinet/shell, the rear panel, kickplate,
control knob, control panel assembly, inner control
access panel, door, hinges, bin trim ring, upper cabinet
face plate, bin seal and lower cabinet face plate must
be removed first. Then, extract the screws at the bot-
tom and top of the bin opening. Extract the screws
along the bottom of both sides of the unit and lift the
cabinet/shell up off of the base frame. (See Figure 5-
11)
#3757320 - Revision B - August, 2005
Model 315I (UC Ice Maker)
Figure 5-10. Lower Cabinet Face Plate Removal

Rear Panel

Figure 5-11. Hinge Mount Support Bracket,
Rear Panel & Cabinet/Shell Removal
5-6
Lower Face
Plate

Cabinet/Shell

Panel
Mount
Supports
Base Frame