Suzuki GSX-S1000 Owner's Manual page 102

Mark top dead center
In the position at
which the filter
gasket first contacts
the mounting
surface.
Tighten the filter 2 turns or
to specified torque.
9. Mark the top dead center position
on the "cap type" filter wrench or
on the oil filter. Use an oil filter
wrench to tighten the filter 2 turns
or to specified torque.
Oil filter tightening torque:
20 N·m (2.0 kgf-m, 14.5 lbf-ft)
Oil filter wrench
10. Replace the drain plug gasket with
a new one. Reinstall the drain plug
and gasket. Tighten the plug
securely with a torque wrench.
Pour 3200 ml (3.4/2.8 US/Imp. qt)
of new engine oil through the filler
hole and install the filler cap. Be
sure to always use the specified
engine oil described in the FUEL,
ENGINE OIL AND COOLANT
RECOMMENDATIONS section.
Drain plug tightening torque:
23 N·m (2.3 kgf-m, 16.5 lbf-ft)
NOTE: About 2800 ml (3.0/2.5 US/
lmp. qt) of oil will be required when
changing oil only.
NOTICE
Engine damage may occur if you
use oil that does not meet
Suzuki's specifications.
Be sure to use the oil specified in
the FUEL, ENGINE OIL AND
COOLANT RECOMMENDATIONS
section.
6-28