Restore White Balance / Gamma Adj-Data To B Board - Sony KDL-32EX720 Service Manual

RESTORE WHITE BALANCE / GAMMA ADJ-DATA TO B BOARD

Note: Please apply after USB-DL when B board is replaced.
Change Data of "VPC" service mode.
a. Select "010 DATA_COPY"
b. Change data from "0" to "1" by pressing "1 / 4" on remote.
c. Wait until data is changed from 1 to 3.
d. When data is changed from 1 to 3, restoring process is finished.
e. In case data is changed from 1 to 2, keep default setting. (No more process is needed)
VPC
000
000
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
KDL-32/37/40/46/55EX720,721,723,724,725,726,726,727,728,729(AEP/UK/RUSS)
category by pressing "2 / 5" on remote.
SERVICE
DATA_COPY
BU_TRANS
<Restore process>
VPC SERVICE
000 DATA_COPY
1
000 BU_TRANS
DATA TRANSFER SUCCESS
<End restore process>
ADJUSTMENT
3
92