Reconnecting All Cables; White Balance Adjustments - Sony KDL-32EX717 Service Manual

Model-Name Model-ID
KDL-32EX717 25773337
KDL-40EX717 25773335
KDL-40EX717 25773335
KDL-46EX717 25773338
KDL-55EX717 25773336
KDL-32EX717 25773337
KDL-40EX717 25773335
KDL-40EX717 25773335
KDL-46EX717 25773338
KDL-55EX717 25773336
5. Exit Service Mode by pressing HOME or turn the TV power
off.
6. Proceed to "Reconnecting All Cables".

2-2-5. RECONNECTING ALL CABLES

After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to "White Balance Adjustments".
KDL-32EX717/40EX717/46EX717/55EX717
Model
Product-ID
Code
54ca0000 3a-0.3
54ca0000 3a-0.3
54ca0000 3a-0.3
54ca0000 3a-0.3
54ca0000 3a-0.3
54ca0000 3a-0.3
54ca0000 3a-0.3
54ca0000 3a-0.3
54ca0000 3a-0.3
54ca0000 3a-0.3
SERVICE ADJUSTMENTS

2-3. WHITE BALANCE ADJUSTMENTS

White Balance adjustment data is located on the Digital Service Menu.
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
NOTE: If the Digital Service Menu is not displayed, press
JUMP or OPTIONS .
3 Press to move to "006 WB" Category.
2
DIGITAL
006 WB
000 WHITE_BALANCE ___
4. Press to enter White Balance Adjustment mode.
0
5. To select the White Balance Adjustment setting that needs to
be changed, do the following:
a. To select R_DRV, press
b. To select G_DRV, press
c. To select B_DRV, press
5 + POWER
Volume
SERVICE
1 .
2 .
3 .
26