Restore Wb / Gamma Adj. Data To B Board - Sony KDL-40W580B Service Manual

Service Adjustment
Save Changing Data by Service Mode 2
1. In "Digital" service mode ( "002 MODEL" category)
001 SEG Select segment information
002 DEST Select destination information
003 MODELNAME Select Model Name
004 SERIAL Can be set Only Once for the new board
005 SHIP_CONFIRM...Can set correct Product Code
006 VAR_TYPE Select variable information
a. Change data for each model. (Refer to 4-4 Part B)
b. Press "Mute", "0" on remote sequentially. Red "WRITE" is
shown. This indicates writing is in process.
c. After a while, red "WRITE" disappears. Green
displayed for a while, which means writing process is done.
d. For the items SEG, DEST, MODELNAME after changing
each item, service save ("mute"+"0") is required. For the
item SERIAL, after inputting the serial number, press key
"12" or "Enter" to save the data.
– Please save the items according to the sequence "SEG ->
DEST -> MODELNAME-> VAR_TYPE"
– When Saving the item "SEG", sometimes instead of
"Writing", the word "Pending" will appear. In this case, skip
"SEG", saving "DEST" , "MODELNAME" and "VAR_TYPE"
is OK.
a a
a
DIGITAL
002 MODEL
001 SEG
b
VIDEO:STANDARD AUDIO:STANDARD
PSAVE:STANDARD
MAIN:
b
TUNER/----/---- ----/----/NTSCU
----X----/----- ----X----/-----
-----/---
Remote Commander
Only when B* board is replaced.
Done will be
SERVICE
HE_BASE
Write
SUB:
-----/---
DIGITAL Service menu
W580B/W585B/W590B/W600B/W605B/W607B/W608B/WM15B

4-5. Restore WB / Gamma Adj. Data to B board.

Please apply after USB-DL when B board is replaced.
1.in "VPC" service mode
a.Select "000 DATA_COPY" category by pressing "2 / 5" on remote.
b.Change data from "0" to "1" by pressing "3 / 6" on remote.
c.Wait until data is changed from 1 to 3.
d.When data is changed from 1 to 3, restoring process is finished.
e.In case data is changed from 1 to 2, keep default setting. (No
more process is needed.)
VPC
000
000
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
b
a
VPC
000
000
DATA TRANSFER SUCCESS
Remote Commander
RB2G
HE,HS Models
SERVICE
DATA_COPY
BU_TRANS 1
Restore process
SERVICE
DATA_COPY
BU_TRANS 3
End restore process
31
CHASSIS