Restore Wb / Gamma Adj. Data To B Board - Sony KDL-32W700B Service Manual

Service Adjustment
Save Changing Data by Service Mode 2
In "Digital" service mode ( "002 MODEL" category)
1.
001 SEG Select segment information
002 DEST Select destination information 002 DEST Select destination information
003 MODELNAME Select Model Name
004 SERIAL Can be set Only Once for the new board
005 SHIP_CONFIRM...Can set correct Product Code
006 VAR_TYPE Select variable information
a. Change data for each model. (Refer to 4-4 Part B)
b. Press "Mute", "0" on remote sequentially. Red "WRITE" is
shown. This indicates writing is in process.
c. After a while, red "WRITE" disappears. Green
displayed for a while, which means writing process is done.
d. For the items SEG, DEST, MODELNAME after changing
each item, service save ("mute"+"0") is required. For the
item SERIAL, after inputting the serial number, press key
"12" or "Enter" to save the data.
– Please save the items according to the sequence "SEG ->
DEST -> MODELNAME-> VAR_TYPE"
– When Saving the item "SEG", sometimes instead of
"Writing", the word "Pending" will appear. In this case, skip
"SEG", saving "DEST" , "MODELNAME" and "VAR_TYPE"
is OK.
a a
a
DIGITAL
002 MODEL
001 SEG
b
VIDEO:STANDARD AUDIO:STANDARD
PSAVE:STANDARD
MAIN:
b
TUNER/----/---- ----/----/NTSCU
----X----/----- ----X----/-----
-----/---
Remote Commander
Only when B* board is replaced.
Done
SERVICE
HE_BASE
Write Write
SUB:
X / X /
-----/---
DIGITAL Service menu

4-5. Restore WB / Gamma Adj. Data to B board.

Please apply after USB-DL when B board is replaced.
1.in "VPC" service mode
a.Select "000 DATA_COPY" category by pressing "2 / 5" on remote.
b.Change data from "0" to "1" by pressing "3 / 6" on remote.
c.Wait until data is changed from 1 to 3.
d.When data is changed from 1 to 3, restoring process is finished. d When data is changed from 1 to 3 restoring process is finished
e.In case data is changed from 1 to 2, keep default setting. (No
more process is needed.)
will be
b b
a
Remote Commander
W700B/ W705B/ W706B/ W707B/ W708B/ W790B
W800B/ W805B/ W807B/ W808B/ W815B/ W817B/ W828B/ W829A
VPC VPC SERVICE SERVICE
000 DATA_COPY
000 BU_TRANS
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
VPC SERVICE
000 DATA_COPY
000 000 BU_TRANS BU TRANS
DATA TRANSFER SUCCESS
RB2G CHASSIS
W855B/ W857B
HE,HS Models
1
Restore process
3 3
End restore process
31