LG LDE4415ST Owner's Manual page 50

50 TROUBLESHOOTING
Food does not broil
properly
Oven temperature too
hot or too cold
Scratches or
abrasions on cooktop
surface
Metal marks
Brown streaks or
specks
Areas of discoloration
on cooktop
Oven will not Self
Clean
"Crackling" or
"popping" sound
Fan noise
Convection Fan stops
Displayed Time is
flashing
,, Aluminum foil used on the broiling pan and grid has not been fitted properly and
slit as rec0mmended!
, See the Using the Oven secti0n:
• in some areas the Power v01tage maY be Iow_
Preheat the broil element f0r5w minutesl
See the Broiling Guide.
• Oven sensor needs to be adjusted.
- See Oven Temperature Adjustment in the Features section.
Coarse particle s such as sa!t Or sand be_een c00ktop and utensi!s can cause
scratches: Be sure the co0kt0P surface and bottom s d utensi!s are c!ean before
using: Small scratches do not affect cooking and will become less visible with
time:
o Cleaning materials not recommended for g!ass-ceram! c cooktop have been
used See Cleaning !he G!ass-Ceramic Cooktop inthe MA!NTENANCE sectio n
C00kware wit hrough bottom has been used i Use smooth;f!at-bottomed
cookware:
Scraping of metal utensils on cooktop surface. Do not slide metal utensils
on cooktop surface. Use a glass-ceramic cooktop cleaning creme to remove
the marks. See Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE
section.
• Boilovers are cooked onto surface. Use a blade scraper to remove soil. See
Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE section.
Mineral deposits from water and food. Remove using a glass-ceramic cooktop
cleaning creme. Use cookware with clean, dry bottoms.
• The oven temperature is too high to set a Self C!ean operation:
Z AllOW the range to c001 and reset the controls:
ASelf Clean Cycle cannot be started if the oven lockout feature is active:
This is the sound of the metal heating and cooling during both the cooking and
Self Clean functions.
- This is normal.
A convection fan may automatically turn on and Off.
Convection fan stops during a convection bake cycle.
- This is normal and is done to allow for more even heating during the cycle.
This is not a failure of the range and should be considered normal operation.
' This is normal. This means that the product has just been plugged in;0r that it
has experienced a power interruption: Touch the Clock key and reset the time,
or touch any key to stop the flashing.