Table of Contents
Advertisement
20) Activating standby mode
If you do not want to use your SurfTab for a while, press the on/off switch briefly
to put the SurfTab into standby mode and save power. To exit standby mode,
briefly press the on/off switch again.
Once you have reactivated the SurfTab, it will initially display the lock screen.
Place your finger on the lock symbol and drag it to the right to the open lock.
Your SurfTab will now display the home screen.
If you previously set up a screen lock, you must now identify yourself using the
i
method that you chose in order to unlock the SurfTab.
Standby mode is activated automatically when the SurfTab is not used for
i
a certain time. You can specify the period of time after which the SurfTab
automatically goes into standby mode under "S
21) Reset and recovery mode
Resetting the SurfTab (Reset)
If your SurfTab "freezes" and no longer responds, you can force a shutdown by
holding the on/off switch for approximately 20 seconds. Then you can switch the
SurfTab on again as usual.
Alternatively, you can press a pointed, but not sharp, object (such as a bent
paper clip) into the reset hole next to the on/off switch for a short while. The
SurfTab will automatically switch itself on again after the reset.
Never use needles or other sharp objects as this may damage your device!
i
"
"d
"
+
+
ettingS
iSpLay
"S
".
Leep
EN
29
Advertisement
Table of Contents
