Table of Contents
Advertisement
Proceed as follows to connect your SurfTab to a Miracast-enabled television:
a)
First, take all of the necessary steps to prepare your Miracast-enabled
television for the Miracast transfer (consult your television's operating
instructions for details).
b) Select "s
ettings
c)
Activate the WiFi function on the SurfTab. To do so, select "W
the on/off switch for WiFi from "oFF" to "on".
d) Further down in the menu column you will find the "d
Tap "d
".
isplay
e) Tap "c
s
ast
cReen
f )
At the top right of the display you will find 3 vertically stacked dots. Tap here.
g) Tap "e
nable WiReless display
h) A list of all available Miracast devices will appear. Tap the device that you
wish to connect to.
i)
A short time later, the selected device will show the display of the SurfTab.
If your television device does not support Miracast technology, a "Miracast dongle"
i
can be used to connect the SurfTab via Miracast. In this case, you must ensure
that the selected dongle is compatible with both the SurfTab and your television.
20) Activating standby mode
If you do not want to use your SurfTab for a while, press the on/off switch briefly
to put the SurfTab into standby mode and save power. To exit standby mode,
briefly press the on/off switch again.
Once you have reactivated the SurfTab, it will initially display the lock screen.
Place your finger on the lock symbol and drag it to the right to the open lock.
Your SurfTab will now display the home screen.
If you previously set up a screen lock, you must now identify yourself using the
i
method that you chose in order to unlock the SurfTab.
Standby mode is activated automatically when the SurfTab is not used for a certain
i
time. You can specify the period of time after which the SurfTab automatically goes
into standby mode under "S
" in the applications menu on the SurfTab.
".
" in this window.
"
+
ettingS
"d
"
"S
t
+
iSpLay
creen
ime out
-F
" and drag
i
i
" menu item.
isplay
".
25
EN
Advertisement
Table of Contents
