Accessories; Service / Warranty - Gardena TCS 720/20 Operation Instructions Manual

Bar length
Chain type
Oil tank volume
Range of extension of
telescopic tube
Weight
Sound pressure level L
Hand / arm vibration a
Measuring process complying with
The stated vibration emission value has been measured according to a standardized
test procedure and can be used for comparison of one electric power tool with
another. It can also be used for preliminary evaluation of exposure. The vibration
emission value can vary during actual use of the electric power tool.

9. ACCESSORIES

GARDENA Chainsaw Oil
GARDENA Replacement Chain
and Bar
GARDENA Replacement Chain

10. SERVICE / WARRANTY

Service:
Guarantee:
12
20 cm
90 px
100 ml
0 – 45 cm
approx. 3.9 kg
89 dB (A)
1)
pa
2) 3.1 m/s 2
vhw
DIN EN ISO 22868 DIN EN ISO 22867.
1) 2)
For lubrication of the chain.
Chain and bar for replacement.
Chain for replacement.
Please contact the address on the back page.
GARDENA guarantees this unit for 2 years (from date of purchase).
This guarantee includes all important defects of the unit that can
be proved to be material or manufacturing faults. Under warranty we
will replace the unit or repair it for no cost if these conditions are
applicable:
• The unit must have been used properly and in keeping with
the requirements of the operation instructions.
• Neither the purchaser or a not approved third party have tried to
repair the unit.
The chain and bar are consumables and are not included in the
guarantee.
This manufacturer's guarantee does not have an effect on the user's
existing warranty claims against the dealer / seller.
If you have problems with this unit, please contact our Service
or send the defective unit together with a short description of the
problem – if there is a guarantee, with a copy of the receipt –
postage paid to one of the GARDENA Service Centres on the
back of this leaflet.
Art. 6006
Art. 4048
Art. 4049