Advanced Intercom Features; Sing Ntercom With Xternal Alls; Eceiving An Ncoming All Ntercom All; Wo Ay Ntercom Alls - GE 28165 User Manual

Dect 6.02-line, cordless handset speakerphone/answering system

Hide thumbs Also See for 28165:

Table of Contents

Advanced Intercom Features

If you receive a telephone call during an intercom call, both handsets or base will emit

alert tone and remain in intercom mode. Either handset or base user may press the

corresponding LINE 1 or LINE 2 button or the handsfree button to answer the call.

Using Intercom with External Telephone Calls

During an external telephone call, you can use the intercom function to;

• page another handset and set up a private (-way) intercom conversation with

another user while the telephone call is placed on hold

• create a -way conversation between the telephone caller, the base, and

cordless handsets

• transfer the external telephone call to another handset

Two-Way Intercom Calls

1. During an external call, press the int button on the handset or base and the external

call is placed on hold. The list of handsets or base shows in the display.

. Use the 5 or 6 button to select desired handset or base.

. Press the SELECT (SKL) to page.

NOTE: The receiving handset or base presses the int button or the

OK (SKL) to answer the intercom call. Both intercom users may speak

privately. The external caller will not hear the intercom conversation.

4. When finished, press the EXIT (SKR) or int button to end the intercom call, return to the

talk mode, and resume your original telephone conversation.

Three-Way calling

Between two handsets or a handset and base and an external call

1. During an external call, press the int button on the handset or base and the external

call is placed on hold. The list of handsets or base show in the display.

. Use the 5 or 6 button to select desired handset or base. A tone sounds and PAGING

shows in the originating handset or base display.

NOTE: PAGING FROM... shows in the display on the receiving handset or

base, and the receiving handset or base must press the int button or the

OK (SKL) to answer the intercom.

. When the receiving handset or base connects, press the UNHOLD (SKR) on the

originating handset or base to conference with the receiving handset or base and the

external caller. CONFERENCE shows in the display on the originating and receiving

handsets.

Table of Contents