Ndicator On H Andset And The B Ase; Asic Peration; I Ndicator; All - GE 28165 User Manual

Basic Operation
Charge/In Use Indicator
The phone is ON when the LED indicator on the handset and the charge/in use indicator on the
base is lit. The handset and base indicators flash when you receive a call.
VMWI Indicator on Handset and the Base
IMPORTANT: In order to use this unit's visual Message Waiting (VMWI)
feature, you must subscribe to this service from your phone company.
The VMWI indicator on the top of the handset or VOICE MAIL indicator on the base flashes
when you receive a new message from your service provider.
Answering a Call
1. To answer a call, press LINE 1, LINE 2, or the handsfree button before you begin
speaking.
. To hang up, press the END/CANCEL button on base or handset, or place the handset
in the base cradle.
Making a Call
1. Press LINE 1, LINE 2, or the handsfree button and dial the desired number.
-OR-
Enter the number first, then press LINE 1, LINE 2, or the handsfree button and the
number automatically dials.
NOTE: Press the handsfree button on the handset during conversation
to switch between handset speakerphone and handset earpiece.
. To hang up, press the END/CANCEL button on base or handset, or place the handset
in the base cradle.
NOTE: If you want to hang up during handset handsfree mode, you
need to hang up by pressing the END/CANCEL button on the handset.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the
DELETE (SKR) to erase the digit(s).
Flash
Use the LINE 1 or LINE 2 button on base or handset to activate custom calling services
such as call waiting or call transfer, which are available through your local phone
company.
0