Table of Contents
Advertisement
Intercom Operation
The intercom feature allows you to have a conversation with another registered
handset without tying up the telephone line, allowing you to still receive incoming calls.
Making an Auto Intercom Call
Make sure the handset is OFF (not in TALK mode).
1.
Press the delete/int/conf button on the handset.
.
.
Use the touch-tone pad to select the handset you want to page.
. A long beep is heard and then the two handsets are immediately connected.
Receiving handset shall immediately come into the auto intercom mode that both
"microphone" and "speaker" of this receiving handset shall be enabled such that
the user of receiving handset can freely talk and listen to the conversation.
When finished, press the END button or delete/int/conf button on either handset
5.
to deactivate the intercom.
Advanced Intercom Features
Receiving an Incoming Call During an Intercom Call
If you receive a telephone call during an intercom call, an incoming call alert tone will
be heard (through the earpiece or speaker). If the user wants to answer an incoming
call, they must press END to terminate the intercom and receive an incoming ring.
Using Intercom with External Telephone Calls
During a telephone call, you may use the intercom/paging function to page another
handset and have an off line, private (two-way) intercom conversation. You may also
have a three-way conversation between the external caller and the handsets, or you
may transfer the external telephone call to another handset.
NOTE: Before you intercom/page another handset, you must
decide whether you want to create a two-way or a three-way
conversation.
8
Advertisement
Table of Contents
