Ransferring Xternal Andsets Or Ase - GE 28165 User Manual

NOTE: A handset or base can enter conference mode directly by
pressing the
during a call.
Between a handset or base and external calls on the Line 1 and Line 2
1. During an external call on either LINE 1 or LINE , press the HOLD (SKR) to put the call
on hold.
. If the originating line is LINE 1, press the LINE 2 button. LINE 1 icon flashes and LINE 2
icon shows in the display steadily.
. Press the CONF Soft Key to conference with the external call.
Transferring External Call to Other Handsets or Base
During an external call, you may transfer the external call to another handset or base.
1. Press the int button on the originating handset or base to put an external call on hold,
and then page the receiving handset or base.
. The list of handsets or base shows in the display. Use the 5 or 6 button to select
desired handset or base.
. Press the SELECT (SKL) to start the page. You will hear a paging tone. PAGING shows
on the originating handset's display or base display, and PAGING FROM.... shows on
the receiving handset's display or base display.
4. When the receiving handset connects, press the END/CANCEL button on the
originating handset or base to transfer the call.
- OR -
Press the END/CANCEL button on the originating handset or base to transfer the call.
NOTE: If there is no answer within 30 seconds after transferring the
call, then both units receive a call back notification and CALL BACK
shows on the display. If neither unit answers within 20 seconds, then
the external call will be automatically dropped.
6
LINE 1 or LINE 2
button on the second handset or base