Table of Contents
Advertisement
Display Messages
The following indicators show the status of a message or of the unit.
BLOCKED CALL/
BLOCKED NAME/
BLOCKED NUMBER
BUSY
CALL WAITING
DELETE ALL?
DELETE CALL ID?
DELETED
ENTER NAME
ENTER NUMBR
INCOMPLETE DATA
LOW BATTERY
NO CALLS
NO DATA
PAGING
PRESS TALK KEY
UNKNOWN CALL
NAME/NUMBER
Handset Sound Signals
Signal
A long warbling tone (with ringer on)
Three short beeps
One short beep (every 7 seconds)
The person is calling from a name or number that has been
blocked from transmission.
Indicates the system is busy and not able to connect to the
system.
Indicates a call is waiting on the line.
Prompt asking if you want to erase all Caller ID records.
Prompt asking if you want to erase the current Caller ID record
that is shown on the display.
Prompt confirming the Caller ID record is erased.
Prompt telling you to enter the name in one of the 50 memory
locations.
Prompt telling you to enter a telephone number in one of the 50
memory locations.
Caller information has been interrupted during transmission or the
phone line is excessively noisy.
Indicates the battery pack needs charged.
Indicates no calls have been received.
No Caller ID information was received.
The page button on the base has been pressed.
Indicates the CID number is a Direct Dial Number (DDN) and
cannot be formatted.
The incoming call is from an area not serviced by Caller ID or the
information was not sent.
Meaning
Signals an incoming call
Page signal
Low battery warning
51
Advertisement
Table of Contents
