Listening To Bluetooth Audio - iHome Split iBT11 Instruction Manual

LISTENING TO BLUETOOTH AUDIO

1
True Wireless indicators
2
2 SECS
8
Press and hold the Power Button to turn on
both connected speakers. (For independent
mono listening (speakers are separated), press
and hold the Power Button on the desired
speaker.) The power on tone will sound and the
front status LED will flash slowly as the unit
looks for a linked Bluetooth device. Once
found, the LED will glow solid white. If operating
on internal battery, the battery indicator LED
will light for five seconds.
True Wireless Mode
Once the blue True Wireless indicators on top
of each connected speaker light, separate the
speakers for best stereo sound.
When operating in True Wireless mode with
speakers separated, Power and +/– Volume
Buttons on either speaker control both
speakers.
Make sure the volume on your Bluetooth device
is at least 50% volume for proper audio
detection. If no audio is detected in 5 minutes
the unit will turn off to save power.
Press and release the + or – Button to control
the speaker volume (hold for rapid adjustment).