Subscribe to Our Youtube Channel
Related Manuals for iHome iBT36
Summary of Contents for iHome iBT36
- Page 1 Waterproof Rechargeable Bluetooth Stereo Speaker System with speakerphone CHARGE BEFORE instruction manual...
- Page 2 Using the IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION For proper waterproof operation, make sure the waterproof cover on the left side of the unit is completely flush with the unit by pressing along the entire edge of the cover until it is completely and securely in place.
- Page 3 Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.
-
Page 4: Table Of Contents
Table of Contents Included / Meet Your iBT36..................... 1-2 Charging the iBT36/Quick Battery Status Check/ECO Battery Mode ........3 Turning the Unit ON and OFF.....................4 Using Bluetooth: Pairing Your Device ..................5 Pairing with a Different Device/Playing Audio Via Bluetooth .............6 Using the Speakerphone feature ..................7... - Page 5 Included 1. iBT36 Speaker 2. USB charging cable 3. Bottle opener/carabiner clip To remove carabiner clip: 1. Hold clip sideways to unit. 2. Press clip hinge post inwards and slide strap loop off of hinge post.
-
Page 6: Included / Meet Your Ibt36
Meet Your iBT36 Top view Volume Down Button Volume Up Button Power On/Off Button Play/Pause/Pairing Button Reverse/End Call Button Forward/Answer Call Button Front view Side view Charging LED Indicator Power/Bluetooth ECO Battery Mode Status Indicator Aux-in Jack Waterproof Door Cover... -
Page 7: Charging The Ibt36/Quick Battery Status Check/Eco Battery Mode
Using the Charging the iBT36 For first time use, make sure to fully charge the internal iHome iBT36 USB Power In port battery for about 8 hours. Computer connected to working outlet RESET AUX-IN USB DC 5V, 1A To charge the unit, connect the included USB charging cable... -
Page 8: Turning The Unit On And Off
Using the Turning the Unit ON and OFF 1. Press the Power Button located on top of the unit to turn the unit ON. The green/red battery status and blue Bluetooth status LED indicators on the front of the unit will light and ascending tones will sound. -
Page 9: Using Bluetooth: Pairing Your Device
Button (located on top of the unit) for 2 seconds. 2 tones will sound and the indicator light on front of the unit will flash blue while the unit attempts to pair. “iHome iBT36” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBT36”... -
Page 10: Pairing With A Different Device/Playing Audio Via Bluetooth
Using the Pairing with a Different Device When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (about 33 feet). To pair with a different device, please follow step 3 on page 5. -
Page 11: Using The Speakerphone Feature
Using the Using the Speakerphone feature NOTE: The unit must be powered on to receive a call and a Bluetooth phone must be linked. When a call is received, playing music is muted to hear the ring tone. Press the... -
Page 12: Chagring Devices Via Usb Out Port
Charging Devices via USB Out Port NOTE: The iBT36 will only charge devices when operating on the internal battery (when NOT connected to power source via the USB POWER IN port).The unit must be powered ON to charge devices via the USB Out Port. -
Page 13: Fcc Information
FCC/IC Information FCC ID:EMOIBT36 FCC Radiation Exposure Statement IC:986B-IBT36 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:... -
Page 14: Consumer Product Safety Guide
Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free... -
Page 15: Troubleshooting
• Check that all connections are correct and properly plugged in. • For internal battery operation, make sure the unit is fully charged. • Make sure your device is properly paired with the iBT36. • Make sure the Power is ON. -
Page 16: Warranty
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Need help?
Do you have a question about the iBT36 and is the answer not in the manual?
Questions and answers