Aux-In Mode - iHome Split iBT11 Instruction Manual

1
PC/Tablet
Mobile Phone Game Devices
Connect one end of the included micro usb charging/aux audio cable to the Charging/Aux-in jack
located on the back of the unit under the rubber cover and connect the 3.5mm audio plug to the
headphone or line-out jack of your audio device. Turn on your device and put it in play mode.
2
3
Using the Aux-in Mode
iPod Laptop MP3/MP4
Press and hold the Power Button to turn on the Split. The Status
Indicator LED will glow, indicating the unit is powered on. Use
track and navigation controls on your device to play audio.
Make sure the volume on your audio device is at least 50%
volume for proper audio detection.
Press and release the + or – Button to control the speaker
volume (hold for rapid adjustment). The unit will turn off automat-
ically if no audio is detected for 5 minutes. Otherwise turn off unit
using Power Button.
10