Introduction Thank you for purchasing the iHome iBT682. This product is designed to provide True Wireless stereo sound for your Bluetooth audio device. Each speaker can also be used separately. This instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference.
Page 3
What’s Included • 2 x iBT682 speakers • 2x USB charging cables iBT682 speakers USB charging cables...
Page 4
Meet Your iBT682 NOTE: only one of the two speakers is Front show below; they are identical. Red Charging/ Battery Indicator Light Microphone Blue/Green Status Indicator Light Blue = Bluetooth Status (single speaker) Green = True Wireless Mode Bottom...
Page 5
USB AC adaptor connected to working outlet TIP: On some iOS (Apple) devices, you can view the iBT682 battery status on your device’s screen. When device is paired and connected, look for a vertical battery icon next to the Bluetooth icon on...
Page 6
Getting Started: First Time Use True Wireless Stereo Each of your iBT682 speakers are pre-synced to one another for True Wireless stereo operation. This sync is permanent (neither speaker can be synced with a different or third speaker). True Wireless link range is about 5 meters (about 16 feet).
Bluetooth: Pairing Your Device the First Time Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT682. Once your device is paired, the speakers can recognize it and you can play your audio through them. Turn on your Bluetooth device and make it “discoverable”...
True Wireless linking. Note: Each separately paired speaker will appear on your device as “iHome iBT682” (just as when you pair both speakers together). You can select the desired instance or remove “iHome iBT682” and re-pair unit(s) again.
Page 9
Using the Using Color Modes There are five color modes, which you cycle through in this order: a. Slow Fade (colors slowly fade from one into the next b. Fast Change (colors change rapidly) c. One Color (select a favorite color) d.
• Make sure unit is completely charged. • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBT682. • Make sure the unit is on Unit doesn’t respond (locked up/ “frozen”) If the unit does not respond, try resetting the unit.
Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact Customer Service at -1-800-288-2792.
FCC Information FCC ID:EMOIBT682 FCC Radiation Exposure Statement IC:986B-IBT682 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
L I M I T E D 1 Y E A R W A R R A N T Y iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.