Introduction Thank you for purchasing the iHome iBT15. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference.
What’s Included • iBT15 speaker • micro USB charging cable • carry strap iBT15 speaker micro USB charging cable carry strap...
Page 4
Meet Your iBT15 Left Side Right Side Talk/Bluetooth Pairing/ Reset Button Play/Pause Button (insert paperclip to + Volume Button reset unit) USB Charging Port – Volume Button Aux-in Jack Power/End Call Button Splash-resistant Cover Power/End Call Button to turn ON or OFF.
Page 5
Status indicator LED TIP: On some iOS (Apple) devices, you Microphone can view the iBT15 battery status on your device’s screen. When device is paired and connected, look for a vertical battery icon next to the Bluetooth icon on the upper right corner of the device’s screen.
Using the Getting Started: Carabiner & Carry Strap The iBT15 has a built-in carbiner clip and comes with a carry strap for easy carrying or attaching to a backpack, shower head, etc. To attach the carry strap, form a small loop in one end of the strap. Insert this loop through the carabiner on top of the unit, then pull the loop back through the larger loop formed in the carry strap to tighten.
There should also be an indication on your device. If no device is successfully paired within 3 minutes the iBT15 will default to previous mode. Once the iBT15 is paired to a device, it will...
3. Use menu and track controls on your Bluetooth device to navigate tracks. 4. Press the – or + Button to adjust the iBT15 volume. A confirmation tone will sound when minimum or maximum volume is reached. You can also adjust volume on your device.
Using the Playing Audio via Aux In 1. Connect one end of a 3.5mm audio cable (not included) to the Aux-in jack on the left side of the unit and connect the other end to the headphone or line-out jack on your audio device.
Troubleshooting Unit doesn’t respond (no power) • Check that unit is fully charged. • Make sure your device is properly paired with the iBT15. • Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) If the unit does not respond, insert the end of a paperclip or similar into the Reset Button located under the splash proof cover to reset the unit.
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Page 12
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free...
Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects...
FCC Information FCC ID: EMO-IBT15 IC: 986B-IBT15 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This Device complies with RSS-210 of the IC Rules; Operation is subject to the...
Page 16
one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Need help?
Do you have a question about the iBT15 and is the answer not in the manual?
Questions and answers