Troubleshooting - iHome Split iBT11 Instruction Manual

1. The unit does not power ON.
The charging dock is not connected to AC outlet, the AC outlet has no power, or is controlled by a wall switch
that is "OFF". Check AC outlet and wall switch. Internal battery charge is too low. Charge both speakers.
2. Unit shuts "Off" unexpectedly.
AC outlet charging base is connected to is controlled by a wall switch that is turned OFF. Check wall switch.
Turn unit on with Power Button. If no audio is detected for 5 minutes, unit shuts off to preserve battery life.
3. Speakers turn back on after being switched off.
Once connected speakers are turned on, wait about 5 seconds before turning off to allow unit to be reset.
4. Unit doesn't respond (locked up or frozen).
The unit may need to be reset. To do so, unplug the unit from power source if connected. Insert end of
paperclip or similar into Reset Port located on bottom of speaker. Reconnect unit to power source. You may
need to re-pair your Bluetooth device(s).

Troubleshooting

14