Troubleshooting - iHome iBT90 Instruction Manual

Unit doesn't respond (no power)
• Make sure unit is completely charged.
• Check that all connections are correct and properly plugged in.
• Make sure your device is properly paired with the iBT90.
• Make sure the unit is on
Unit doesn't respond (locked up/ "frozen")
If the unit does not respond, try resetting the unit by inserting the end of a
paperclip or similar into the Reset Port located under the splashproof seal
on the back of the unit .
To clear Bluetooth settings, press and hold both the
Speakerphone Button for about 10 seconds. Note that doing so will clear
settings, and any Bluetooth devices will need to be re-paired.
Trouble pairing device with iBT90
Bluetooth implementation varies depending on your device's hardware and
operating system. Please see our website for updates on pairing.
• When you power ON the speaker, it will automatically link with the last
previously paired Bluetooth device if the device is still within range (about 33
feet). To pair with a di erent device you must turn o Bluetooth capability on
the already paired device, or take it out of range.
• If your device does not auto-link when within range, re-pair the device. To do so,
first delete the iBT90 from your Bluetooth devices menu.
• Make sure your device is working properly. Check your device's manual for
details on Bluetooth pairing and linking.
For further information and to see the latest instructions, visit
8
www.ihome.com/support

Troubleshooting

Bluetooth/
9