Table of Contents
Advertisement
Cancelling the setting
Press the
Clock button. Press the - button until zero is
0
shown on the display. Switch off the function selector.
Setting the cooking time if the clock is hidden
Press the
Clock button twice and make your settings as
0
described in point 4.
If the oven is to switch on and off
automatically
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Example in the picture: 3D hot air
meal takes 45 minutes to cook and should be ready at 12:45 .
The function selector is used to set the type of heating.
1.
The temperature selector is used to set the temperature or
2.
grill setting.
Press the
Clock button.
0
3.
Use the
or
button to set the cooking time.
@
A
4.
Setting the clock
When the appliance is connected for the first time or after a
power cut, the
0
symbol and three zeros flash in the display.
Set the clock. The function selector must be switched off.
Setting procedure
Press the
0
Clock button.
1.
12.00 appears in the display and the
Use the + or - button to change the clock.
2.
After a few seconds, the time is saved. The
out.
Changing from summer to winter time, for example
Press the
Clock button twice and change the time using the
0
+ or - button.
:
, 200 °C. It is 10:45. The
0
symbol flashes.
symbol goes
0
Press the
Clock button repeatedly until the
0
5.
flashes.
You can see in the display when the meal will be ready.
Use the
button to set a later end time.
@
6.
The setting is adopted after a few seconds.
The end time is shown in the display until the oven starts.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
End symbol
y
0
button
9
Hide quick links:
Advertisement
Table of Contents
