Installation - AEG voxtel s110 combo Quick Start Manual

5
Right soft key function. Press to start an intercom call.
Right soft key function. Press to go back to the previous menu
(back) level or cancel the current action.
Right soft key function. Press the alarm, or mute/unmute the microphone
during a call.
5.3 Base station (see P4)
#
Store
11
In idle mode: Press to enter the Direct Memory storing mode.
Find
12 In idle mode: Press to find/page all registered handsets.
Press and hold to enter registration mode.
R
Flash
13
During a call: Press to send a Flash.
Redial
14
Volume +
15 During a call: Press to increase the volume.
When ringing: Press to increase the ringer volume.
Volume -
16 During a call: Press to decrease the volume
When ringing: Press to decrease the ringer volume
Speaker
In idle: Press to access the line in speakerphone mode.
17 During a call: Press to toggle between the speakerphone and the handset
mode.
During ringing: Press to answer a call in speakerphone mode.
# / Pause
18 # During dialling or storing a number: Press to insert a #.
Press and hold to insert a pause (P).
Direct Memory Keys (M1, M2 and M3)
19 M1/M2/M3
Press to dial the number stored in the memory key in speakerphone mode.
6

INSTALLATION

Important:
The base must be plugged into an electrical outlet at all times to work fully,
and the cordless handset will not work without it. Only use the power supply adapters and telephone line
cord supplied with the product. Others may not be compatible and may cause a problem.
6.1 Connecting the Corded Base (see P5)
Connect the corded handset to the base station, using the coiled line cord provided and making sure
the plugs are inserted fully and click into place in the socket on the handset and the side of the base.
Plug the power adapter & telephone line cord into the sockets at the back of the base.
Plug the power adapter into a 230Vac, 50Hz mains socket, and the line cord into your telephone line
socket.
Meaning