Table of Contents
Advertisement
10
6
6.1
• Plug the power supply and line cord into the base station.
• Plug the power adapter into a 100-240Vac 50/60Hz mains socket and
the line cord into your telephone line socket.
Warning:
Use only the provided adaptor, using other power supplies may cause a
hazard or damage the phone.
Install the base unit in a position where the mains adapter plug will reach
an easily accessible mains socket to unplug in case needed. Never try to
lengthen the mains power cable.
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2
• Place the 2 supplied batteries into the battery compartment with
the polarity markings. Use only the NiMH rechargeable battery type
provided with the telephone.
• Position the battery compartment cover over the batteries and slide up
to click into place.
• Put the handset on the base and charge for 15 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
7
7.1
7.1.1
• Enter the phone number and press to connect to the line and dial the
number.
>When entering the number, if you make a mistake, press
digits.
AEG Voxtel D205_V4_A6 UK-DE.indd 10
INSTALLATION
Connecting the base station (see p5)
Installing and charging the batteries (see P3)
TELEPHONE OPERATION
Make a call
Preparatory dialling
to delete
15/08/2012 9:20:49
Advertisement
Table of Contents
