Table of Contents
Advertisement
Set Up Procedures (continued)
Contrast Adjustment
1.
With the Info Center in Instrument System Mode, use the
SCROLL UP ARROW or SCROLL DOWN ARROW buttons to
display the Set Up screen.
2.
Push the Enter button to display the Set Up Menu screen.
3.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to highlight the Contrast line in the menu.
4.
Push the Enter button. Once the Enter button is pushed, the
highlighted line will start flashing on and off indicating that
the system is in data entry mode. The Contrast is set at 12
at the factory. Lowering that number will make the screen
appear lighter and increasing that number will make the
screen darker.
5.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to adjust the contrast to the desired level. Changes
in the contrast take effect immediately, so you can see the
effect on the display as you make the adjustment.
6.
Push the Enter button to store the new value. The Contrast
line will stop flashing.
7.
Push the Back button to exit the Set Up Menu screen.
Unit Selection
1.
With the Info Center in Instrument System Mode, use the
SCROLL UP ARROW or SCROLL DOWN ARROW buttons to
display the Set Up screen.
2.
Push the Enter button to display the Set Up Menu screen.
3.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to highlight the Units line in the menu.
4.
Push the Enter button. Once the Enter button is pushed, the
highlighted line will start flashing on and off indicating that
the system is in data entry mode.
5.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to toggle between English and Metric Units.
6.
Push the Enter button to store the new value. The Units line
will stop flashing.
7.
Push the Back button to exit the Set Up Menu screen.
The following parameters change in value in response to a
change in units:
Depth
Air Temperature
Lake Temperature
© 2008 Skier's Choice, Inc.
Digital Speed
Oil Pressure
Coolant Temperature
Running System Diagnostics
1.
With the Info Center in Instrument System Mode, use the
SCROLL UP ARROW or SCROLL DOWN ARROW buttons to
display the Set Up screen.
2.
Push the Enter button to display the Set Up Menu screen.
3.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to highlight the Service line in the menu.
4.
Push the Enter button. The Service screen will be
displayed.
5.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to highlight the Gauge line in the menu.
6.
Push the Enter button. The Gauge line will start flashing.
7.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to select between the NORM, SWEEP, FULL, and
ZERO options.
8.
Push the Enter button to activate the selected gauge exercise
routine. Note: Once the exercise routine is initiated, it will
run until the NORM option is once again selected or until
the Back button is pushed to exit the Service screen.
9.
Pushing the Back button again will exit the Set Up Menu
screen.
Resetting the Perfect Pass™ System
1.
With the Info Center in Instrument System Mode, use the
SCROLL UP ARROW or SCROLL DOWN ARROW buttons to
display the Set Up screen.
2.
Push the Enter button to display the Set Up Menu screen.
3.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to highlight the Service line in the menu.
4.
Push the Enter button.
5.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to highlight the RESET PP line in the menu.
6.
Push the Enter button.
7.
The Service screen will be displayed.
8.
Push the Back button to exit the Service screen.
9.
Push the Back button again will exit the Set Up Menu
screen.
3 —
Hide quick links:
Advertisement
Table of Contents
