Skier's Choice Supra Instruction Manual page 38

Info Center Screen Descriptions
Main Screen
The Main Screen displays digital speed and engine RPM in a
large font size.
The indicated speed may be displayed in either English or Metric
units as selected in the Set Up Menu screen.
Engine Screen
The Engine Screen displays engine oil pressure, engine coolant
temperature, battery voltage, and the percentage of fuel
remaining.
The oil pressure and coolant temperature may be displayed in
either English or Metric Units as selected in the Set Up Menu
screen.
Depth - Temperature Screen
The Depth — Temperature Screen displays depth of the water
under the boat, the air temperature, the water temperature,
and the total engine hours.
The depth, lake, and air temperature may be displayed in either
English or Metric Units as selected in the Set Up Menu screen.
— 38
Set Up Screen
The Set Up Screen is the gateway to the Set Up sub-menu from
which you can adjust the displays contrast, select the desired
display units, calibrate the Trim Gauge, and run diagnostic
routines.
From the Set Up screen, push the Enter button to display the
Set Up Menu screen.
Set Up Procedures
NOTE: All system set up parameters are pre-set at the factory
and normally do not require adjustment in the field.
Speedometer Calibration
1. With the Info Center in Instrument System Mode, use the
SCROLL UP ARROW or SCROLL DOWN ARROW buttons to
display the Main screen.
2. Push and hold the Enter button for 3 seconds to display the
Speedo Calibration screen.
3. While holding a constant speed compare the displayed
speed against your standard (stop watch or GPS) and use
the SCROLL UP ARROW or SCROLL DOWN ARROW buttons
to adjust the displayed speed to agree with the standard.
4. Once the speeds are in agreement push the Enter button to
store the calibration and return to the Main screen.
© 2009 Skier's Choice, Inc.