Skier's Choice Supra Instruction Manual page 50

Rad-A-Cage
If your Supra model has been equipped with an optional RAD-A-CAGE towing
tower, please review this section for details on it's usage, maintenance and
storage. The cage is designed as a stable tower to enhance wakeboarding. It is
NOT intended to be used to tow skiers, barefoot skiers, or multiple wakeboarders.
Such use will void any warranties written or implied.
Before use, be sure that all mounting bolts are properly tightened in
place.
Be aware of and avoid low overhead objects such as bridges, power lines,
overhanging trees, etc.
To Raise Cage
• Lift the tower and swing up the rear legs. Install the four
hand knobs.
The threads in the aluminum foot could be damaged if the bolts
are not aligned and threaded correctly.
The Rad-A-Cage is designed to pull a single (1) wakeboarder,
trick skier, or kneeboarder.
NOTE: Apply a thin coat of anti-seize to the threads of the
hand knobs periodically.
— 0
To Lower Cage for Storage
• Remove the four hand knobs from the top of the rear leg
While holding the tower up, lower the side legs. Then lower
the tower downward into the boat.
© 2009 Skier's Choice, Inc.