Table of Contents
Advertisement
Smart Plate
1.
Info Center Main screen list enter button "auto" or "main"
with highlight. Use arrows to choose mode.
2.
Once boat is above 16 mph, highlight toggles to %. Use
arrows to modify % deflection on auto mode.
3.
Hit back to unhighlight.
— 0
Trim Gauge Calibration
Note: The Trim Gauge is calibrated at the factory and need
not be recalibrated unless the indicated trim position no
longer agrees with the physical position of the wake plate at
its extremes.
1.
With the Info Center in Instrument System Mode, use the
SCROLL UP ARROW or SCROLL DOWN ARROW buttons to
display the Set Up screen.
2.
Push the Enter button to display the Set Up Menu screen.
3.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to highlight the Trim Cal line in the menu.
4.
Push the Enter button.
5.
The Trim Cal screen will be displayed.
6.
Use the SCROLL UP ARROW or SCROLL DOWN ARROW
buttons to highlight the Down CAL line in the menu.
7.
Push the Enter button.
8.
The DOWN CAL line will be highlighted and flashing. Use
the Manual Trim Switch to run the Trim Tab all the way down
and push the Enter button to store the down value. The
DOWN CAL line will stop flashing and indicate DONE.
9.
Use the SCROLL DOWN ARROW buttons to highlight the
UP CAL line in the menu.
10.
Push the Enter button.
11.
The UP CAL line will be highlighted and flashing.
12.
Use the Manual Trim Switch to run the Trim Tab all the way
up and push the Enter button to store the up value. The UP
CAL line will stop flashing and indicate DONE.
13.
Push the Back button to exit the Trim Cal screen.
14.
Push the Back button again to exit the Set Up Menu
screen.
© 2009 Skier's Choice, Inc.
Hide quick links:
Advertisement
Table of Contents
